Nwywre Island - Laboratory

Robot
Similar in style to those seen on Robot Wars, Battlebots, and My bots design is based on the Panzerkampfwagen VI Panther G-2 tank. The tread angle has been reversed and turret moved back so its centered. Panzerkampfwagen VI Panther G-2
Built by Germany during WWII, the Panther appeared in November 1942. Designed by Porsche and manufactured by MAN, it was one of the best tanks ever built. It had a 75mm gun which was capable of penetrating the armour of any Soviet tank. Other design features included sloped armour to deflect shot, torsion-bar suspension, interleaved road wheels. The armour was 80mm thick and its 650hp engine could travel at 28mph.

MAN Length w/gun 28' 4.5"
Porsche Specs
Length w/gun 32' 8"
Length w/o gun 24' 2"
Height 10' 1"
Width 12' 5"
Ground clearance 1' 7"
Max Speed 24 mph, 38 kph

ave victus 315 lbs wedge shape design pincamera to see cockpit view sensor on flipper to auto flip enemy white flashers blue on chrome tiger striping Necessary 1. speed controller - Vantec RDFR38E two 4QD 200Amp electronic speed controllers, with Basic Stamp 2 RC interface 2. battery - trickle charger, NiCad 9.6 volt battery packs (maybe - lithium battery, energy cell) two 24v 80amp output or 6 12v 40AH batteries 3. motors - four 24v wheelchair motors (with gearboxes) 4. chassis 5. wheels Optional 1. armor 2. weapon Four wheel drive via gearbox and chain at 8:1 ratio. Steering - skid/tank 4 wheelchair drive motors hard rubber tank treads (different hardnesses)adjustable clearance hidden wheels Armament hydraulic rotating interchangeable mace, diamond tip pick, smithing hammer 4kg axe, powered by a 100mm, 150psi pneumatic ram, generating 800kg+ of force. The ram is fed from an old CO2 fire extinguisher holding either nitrogen at 1000psi or liquified CO2 pneumatic flipper in back (grabbers on underside edge) two 2" pneumatic cylinders running 150psi. That's 471 pounds force per maybe - front has two spikes with (in/out) action, with drive train maybe - on bottom pop out tusks spine illegal air rocket side spears (firecracker tips) or electric short circuit or water or magnet Armor - 1/4" welded alum with 1/8" alum bottom and sides (made from recycled road signs) Frame - 1"x .083 square tubing, welded of course. grade 5 plate titanium & aluminum frame kevlar polycarbonate (Lexan) fire & bulletproof waterproof Combat Shell - 1/2" armor sheet metal body/fiberglass matting spectra body armor bullet proof vest coat fiberglass and plastic to lexan and kevlar to steel, aluminum and titanium two 12 horsepower engines, 220amps (max 300 ea)

Go to the Top

This site was proudly forged in the beautiful wilds of Canada.
The true north strong and free.
Copyright © 1999-Current, UEC Website Design in Winnipeg, MB, Canada. All rights reserved. Disclaimer
You can contact us using the e-mail addresses are listed on contact page.